PI007-D040 v1 Pi Cassette Operator Guide
17
Loading Cassettes
The Pi Cassette printer can select between one on-board Cassette hopper and one manual
load position. Prior to use, the on-board Cassette hopper should be loaded with Cassettes.
The Cassette hoppers have a capacity of approximately 40 Cassettes. The Cassettes should
never be stacked above the top of the hopper as they could fall from the top if stacked too
high. The Cassette hopper will need to be attached to the top of the Pi Cassette printer.
To load Cassettes into the hopper:
1. Place a string of cassettes into the hopper.
2. While pressing downward on the top of the stack, firmly
pull the plastic string out of the cassettes.
3. Add Cassettes as necessary until the hopper is full –
the Cassettes should never be stacked higher than the
top of the hopper.
Cassette Selection
It is critical that the Pyramid Innovation cassettes are used in the Pi Cassette printer, these
cassettes are specially designed for best operation in the printer. Using other cassettes, can
cause damage to the instrument or affect print quality or print chemical resistance.
This operator guide includes a list of Cassettes which have been tested and are approved
for use in the Pi Cassette printer.
