Pyramat S2500-W, Owner'S Manual

Page: 4 / 27

SET-UP
1
Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
Secure velcro tab on the bottom
of the rocker.
2
Place the Sound Rocker so
that the control panel is less than
9 ft./2.7 meters from the power
source.
3
Connect the power adapter
to the power DC port on the
control panel. Then, plug the power
adapter into an electrical outlet.
4
Twist the volume knob on
the control panel to click on the
power.
5
Check the speakers on top to
see if the Pyramat logo is lit up.
Twist volume knob to power off the
Sound Rocker, then proceed to the
connection method shown below
for your audio/video device.
9 FEET OR LESS
1
2
3
4
5
6
7
8
3
CAUTION:
Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.