ITEM NUMBER (Red): 10175801
UPC: 810965006746
SET UP
5
Align the right armrest holes with
the two holes on the right side of the
seat cushion. Secure with 2 Armrest
Bolts. Repeat step for left armrest.
8
Cover all bolts with Plastic Caps.
1
Insert the 5 caster wheels into the
base.
2
Insert the Gas Lift into the hole
provided on the base.
3
Align the seat plate with the 4 screw
holes as shown. Secure with 4 Seat
Plate Bolts provided.
6
Slide the backrest between the
armrests on a slight angle and align
with the bottom holes on the right
and left armrest. Secure each side
with 1 Armrest Bolt. DO NOT
TIGHTEN DOWN ALL THE WAY.
7
Rotate the backrest to align with the
top holes on the armrests. Secure with
2 Armrest Bolts. TIGHTEN DOWN ALL 4
BOLTS.
10
Pull up on the locking tilt control to
raise and lower the seat.
12
Twist the tension knob to adjust
the tension of the reclining backrest.
11
Pull out the locking tilt control to
release the backrest and allow the chair
to recline.
4
Mount the seat on the gas lift by
aligning the hole in the center of the
Gas Lift with the hole on the Seat Plate.
9
Connect the audio cable for the
speakers and control panel. Unzip the
corner of the Backrest and connect the
two black cables together. Connect
the Power Adapter to the power cable.
