background image

ARMING OPERATION

To arm the system press transmitter button 1:

t

The siren will chirp once.

t

The parking lights will 

 once.*

t

The LED will 

 rapidly then start 

 slow-

ly. After 8 seconds the system is armed (2-way
only).
While armed, the system will trigger if:

t

If alarm detects a light impact, siren chirp, and

lights 

 3 times to warn away a potential intrud-

er. When triggered a second time  in 15 seconds,
the siren will sound and parking lights will 

 for

15 seconds, Ignition Disable will be engaged.

AUTO REARM

The auto rearm feature allows the system to auto-
matically re-arm itself in the event the system is
disarmed and ignition is not turned to the ON posi-
tion within 30 seconds. To temporarily disable fea-
ture press button 2 twice. 

DISARMING OPERATION

To disarm the system press transmitter button 2.

t

The siren will chirp twice.

t

The parking lights will 

 twice.*

TAMPER ALERT  – 2-WAY ONLY

If the alarm was triggered while away from the
motorcycle, the LED will 

 twice every 2 sec-

onds prior to disarming the alarm.

DISARM WARNING

If alarm is not armed 10 seconds after turning
motorcycle 

, the siren will chirp 3 times and the

turn signals will 

 3 times, to remind the driver

to arm the system. 

SILENT ARMING/DISARMING

Press transmitter button 1 twice for silent opera-
tion. The arm and disarm silent mode will be
enabled. To disable this mode, press button 1 twice.
In silent mode, siren will not sound when system is
triggered. Lights will 

 and ignition disable will

still function. 

REMOTE PANIC

In the event of an emergency (panic) situation, the
system’s siren can be triggered for 10 seconds to
attract attention. To activate the panic feature,
press transmitter button 1 for 2 seconds:

t

The siren will sound.

t

The parking lights will 

Press button 1 to exit panic mode and rearm the
system. Press button 2 to exit panic mode and dis-
arm the system. The panic feature will not operate
when the ignition is on.

OPTIONAL ANTI-HIJACK FEATURE

During driving, press button 3 for 2 seconds, the
siren will chirp sharply, and lights will 

 immo-

bilizing the engine after 10 seconds. Press button 2
to stop this function.

BIKE LOCATOR

To locate motorcycle, press button 4 once or press
and hold button 1 for 3 seconds, the siren will chirp
for 10 seconds and lights will 

FUNCTIONS

4

Summary of Contents for WATCHDOG PLMCWD15













Reviews: