How To Use
1.
TONE/PLUSE SWITCH
On the bottom of telepone base is the P/T switchable dialer.If you have touch tone
service then slide the switch to the T(Tone)position; if you have rotary dial service
then slide the switch to the P(Pulse) position.
2.MAKING AND ANSWERING CALLS
To get a dial tone or answer an incoming call, lift the handset; To hang up, either
replace the handset or simply press the HANDSET CRADLE.
3.RINGER SWITCH
You can choose the loudness of the ringing of the phone by the ringer switch located
on the bottom of telephone base to either HIGH or LOW
4.LAST NUMBER REDIAL(R)
The feature may be used to speed dial the last number dialed. Simply pick up the
handset listen for dial tone and then momentarily press the REDIAL button, the last
number dialed will dial out automatically.
5.FALSH FUNCTION
If you get a busy tone after entering the number, press the FLASH butoon first, after
hearing the dial tone, institute a dial tone for another call.
Press the FLASH button to terminate a call, and institute a dial tone for another call to
getting another call from call waiting.
6.PAUSE FUNCTION
In some cases, such as PABX or Long distance service, a pause should be inserted in
dialing sequence. The PAUSE button can be insert about 4 seconds interval with no
dial output.
Parts Included
Your new telephone includes the following items
1-
Telephone Body
1-
Telephone handset
1-
Handset coil cord
1-
Line cord
1-
Owners manual
Care and Maintenance
Use soft and dry cloth to clean the telephone, use polish for wood for polishing the
wooden parts
1.
Protect the telephone from the high temperature
2.
Keep the telephone free from the dust and moisture; if it gets wet please wipe it
dry immediately.
3.
Don’t use any kind of chemical or any abrasive powder to clean the cabinet
4.
Don’t use the telephone during the electrical storm; A lightning strike can cause
serious damage
5.
As extra protection to disconnect the telephone during electrical storms
