Pyle SereneLife PSLHTM20, User Manual, Page: 6 / 8

1.
Grass Cutter Blade
2.
Shrub Cutter Blade
3.
Safety Lock-off
4. ON/OFF
Button
5.
Blade Guard
6.
Battery Charger
PROPER USE
The equipment is designed for cutting the edges of lawns and small areas of grass in private and hobby
gardens. Tool for private and hobby gardens are not suitable for use in public figures, parks and sport
centers, along roadways, on farms or in the forestry sectors. For the tool to be used properly it is imperative
to follow the instructions set out in the manufacturer’s directions for use.
IMPORTANT!
It is prohibited to use the tool to chop material for composting because of the potential
danger to persons and property.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be case of misuse.
The user / operator and not the manufacturer will be liable for nay damage or injuries of any kind caused as
a result of this. Please note that our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purpose.
OPERATION
Before Starting
Charging the battery pack (Fig. 1/3)
• Connect the charger to the charging station (Fig. 3)
• Check that your mains voltage is the same as the marked on the rating plate of the battery charger. Plug
the battery charger in a socket outlet. The red LED (Fig. 3 / Item 1) comes on to indicate that charging
voltage is available.
• The battery pack is being charged, An empty battery pack requires a maximum charging period of 3 to 5
hours. The temperature of the battery pack may rise slightly during the charging operation. This is normal.
• As soon as the battery pack is fully charged, the red LED (Fig. 3 / Item 1) extinguishes if the rechargeable
battery fails to charge. Check whether there is a voltage at the socket outlet. Timely recharging of the
battery pack will help it serve you well for a long time. Recharging is always necessary when you notice a
drop in the tool’s performance. Never allow the battery pack to become fully discharged. This will cause it
to develop a defect.
Operation
The area to be cut must first be cleared of stones and other solid objects. The safety lock-off (Fig. 1 / Item
3) prevents the tool being started unintentionally. Activate the safety lock-off (Fig. 1 / Item 3) by pushing it
forward and pressing the ON/OFF switch (Fig. 1 / Item 4) at the same time. To switch off the tool, let go of
the ON/OFF switch (Fig. 1 / Item 4).
Cutting the grass
Allow the grass cutter to glide above the ground. The best results are achieved when the lawn is dry. When
you notice a drop of cutting performance, recharge the tool immediately so that the battery does not
become fully discharged.
Trimming hedges
The tool can be used to trim small hedges and shrubs. Hold the tool slightly tilted in relation to the hedge
you want to cut. First cut the sides from the bottom up, then cut the top. Watch out for foreign objects in or
on the hedge which could damage the blades.
Best time to trim hedges:
• As a general rule, hedges which lose their leaves in the autumn should be trimmed in June and October.
• Hedges which do not lose their leaves should be cut in April and August.
www.PyleUSA.com
5