Dear Customer!
Congratulations on the purchase of our progressively designed humidifier. We hope that you will enjoy
our products and choose them for years to come. In order to use this product efficiently and safely,
please read this manual and save it for future reference.
Complete Set
Standard complete set of the product includes:
Humidifier
Brush
Floater
Owner’s manual
Due to the constant improvement of the technical characteristics of these models, we reserve the right to make
changes in the construction and /or the complete set of each product.
Operating the Humidifier
1.
Ensure that the machine is powered off
2.
Cover the inner water tank cover with the floater pile
3.
Insert the floater from the top of the pile*
*
the direction for the floater should be same as below:
4.
Insert water into the top of humidifier
*the water must be under the maximum position, or the mist will not be normal.
5.
Cover the upper water tank cover
6.
Connect the power
7.
Turn the humidifier on and set the intensity of the mist spray for the humidifier by using the touch
screen.
Instructions are as follows:
a)
Press the power button to turn on the humidifier;
b)
Press the power button again to turn off the humidifier;
c)
Press the LED button to turn on/off the optional night light.
d)
The humidifier has three mist options: High, Medium, and Low. Change the position with the + or
- button. Each mist option has a color LED indication: Blue LED stands for High; Green LED stands for Medium.
Red LED stands for Low.
e)
If there is no more water in the tank, the LED will continually flash for 60 seconds and then
automatically power off.
*After 2-3 minutes of the humidifier being powered on, some mist will build up on the margin of the upper
cover; this is normal.
WARNING!
Don’t touch the ultrasonic atomizer while the humidifier is being powered on. If you want to take the floater
off, please make sure that you power the humidifier off first. The ultrasonic atomizer is very hot and it can
burn your hand unless you follow this warning.
8.
You can take off the cover and add some
non-woven fabrics or
a few drops of aromatic oils if you would
like your humidifier to spray scented mist.
WARNING!
Don’t add any material to absorb the aromatic oils other than
non-woven fabrics
, or this can
flow into the
machine and affect the sensor’s sensitivity.
9.
If the sensor isn’t working properly, please clean the sensor with a cotton cloth or swab and it will work
normally.
NOTE
˖
10.
We suggest that while using the humidifier, you should only add mineral water or tap-water instead of
purified and/or distilled water. If you use purified water (without mineral substances), the 304-feeler pin will not be
able to probe the water.
PHUMDIF8
