www.PyleUSA.com
3
WALL MOUNTING HARDWARE
TV MOUNTING HARDWARE
Step 1:
Remove the plaster board on the surface of concrete wall when assembling
mount on the concrete wall. Hold Wall plate (A) against wall at desired position on
concrete wall, then using a pencil mark 4 hole locations. Then drill holes according
pencil marks using 3/8" size drill bit to a depth of 2.5". Then you will need to use
wall anchors . Insert wall anchors into holes, you may need to use hammer to
lightly tap wall anchors into wall. Then fix Wall plate (A) to the wall with lag bolt
and washers . (Figure 1)
CAUTION:
The concrete wall minimum thickness no less than 5.5 inches, and surface covering
can't more than 3/8 inches.
01
Lag bolt 4pcs
02
Anchor 4pcs
03
M8 washer 4pcs
04
Allen Key 1pc
05
Tube 2pcs
06
Bolt 8pcs
a--M4x12 bolt
4pcs
b--M6x12 bolt
4pcs
c--M8x25 bolt
4pcs
d--M4x30 bolt
4pcs
e--M6x35 bolt
4pcs
f--M8x50 bolt
4pcs
g--M6x17mm spacer
4pcs
h--M8x22mm spacer
4pcs
i--M8x10mm spacer
4pcs
j--2.5mm spacer
8pcs
k--M4 washer
4pcs
l--M6 washer
4pcs
