www.PyleUSA.com
3
Installation
Step 1
Once you’ve determined the mounting bar size, wrap the proper size non-slip rubber pad
around the bar to prevent it from being scratched by the ring. Refer to the chart above for
appropriate rubber pad size.
Step 2
Place the clamp pad over the bar.
Step 3
Ensure that the clamp’s screw holes are aligned with the clamp base’s screw holes and insert M6
x 60mm screws with M6 spring washers into the holes. Tighten the srews. Do not overtighten.
Step 4
Installation is now complete.
Step 1
Step 2
Step 3
Step 4
①
②
③
④
⑤
