Listening to radio
Manual tuning
1. Turn on unit by On/Off button (5) & then press the Function button (4) to select “ FM ” mode.
2.
Press the
Tune / Skip up “
or down
” (8/7) button to change the received frequency in order to reach your
desired FM channel
3. Adjust volume up/down button (13/15) to the desired volume level.
Auto tuning
1. Press Function button (4) to select “ Tuner ” mode.
2. Press and hold the Tuning / Skip up “
or down
” button (8/7), the unit will start searching until reach receive a
FM channel, repeat this step until the desired radio station is being reached.
3. Adjust volume up/down button (13/15) to the desired volume level.
Hints for best reception:
-
The receiver has a build-in FM rod antenna (20) on top of the unit. Extend it as long as possible to get best reception.
Preset stations
You can store up to total of 20 FM radio stations in the memory.
1. Set to FM mode by “Function” (4).
2. Turn to the desired FM station according the above “Listening Radio” instruction.
3. Press and hold “ Pre-up/+10/Pro ” button (12) few second to active program state. Display will flash with “ P 01 “.
4. Press Tuning / Skip up “
or down
” button (8/7), to select the desired station memory position for storage.
5. Press Pre-up/+10/Pro ” button (12) once again to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
7. Now you can select the presets stations in order by pressing the “ Pre-up/+10/Pro” button (12).
¾
The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are recommended
to switch the system into standby mode for convenience usage.
¾
There are 3 seconds for program state, after 3 sec. This state would resume to normal tuner mode automatically.
¾
You can overwrite a present station by storing another frequency in its place.
Playback of MP3 song via USB storage media or memory card
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port or
SD/MMC card.
1. Set the system at off mode first or other function except USB/SD mode.
2. Open the USB socket cover then plug-in the USB pen-drive with the face in &
make sure it going into completely or open the SD slot cover then insert the
memory card in the direction of the arrow as shown in the cover of the memory
card slot. Insert straight without bending.
z
Connecting the USB pen drive upside down or backwards could damage
the audio system or the storage media (USB thumb drive). Check to be
sure the direction is correct before connection.
3. Turn on the unit again by On/Off button (5) and press Function button (4) to
“ USB ” or “ SD ” mode
.
The system will start reading the storage media automatically after connecting, and LCD
display (1) will show the running time of MP3 files.
z
Play / pause mode
1. If
Play/Pause
button (16) is pressed during playback, system go to pause mode and the playing time will start
flashing at the LCD display (1). Press again to resume normal playback.
z
Stop mode
1. If
Stop button (17) is pressed during play or pause mode. Go to stop mode and display total number of track on the
LCD display (1).
z
Skip mode (skip up
/skip down
)
1. During play or pause mode, if skip up
button (7) is pressed it will go to next track and display the track no. and
will change to play mode.
2. During play or pause mode, if Skip down
button (8) is pressed, it will go to the previous track and change to play
mode.
z
+10 tracks
1. Press “Pre-up/+10/Pro” button (12) to skip 10 track to your favorite track more convenience.
2
