background image

INSTRUCTIONS

SYSTEM FUNCTION FIGURE

1.  Confirm the power

AC Power: Before operation, please confirm the voltage is 

same as the specified one marked on the label. If not, the unit 

will be damaged.

Built-in Rechargeable Battery: You needn't plug-in the AC

power when the voltage for rechargeable battery is enough 

but use the battery directly.

When the Low Voltage Indicator comes yellow, it indicates 

the battery voltage is not enough, please charge it in time.

When the Low Voltage Indicator comes out, it indicates the 

voltage is standard now.

If the unit is not used for a long time, please charge the rec-

hargeable battery every 2 months, 8-10 hours for each time.

2.  Operation Instructions:

3

4

Plug the power cable into the socket and connect it with this 

amplifier system.

Switch on the amplifier, the Power Indicator comes red.

During charging, RECHARGE indicator comes red, when the 

indicator flashing, that means battery is amost full while it is 

ready all indicators will off.

During charging, you can play music at the same time, then 

RECHARGE indicator will flashing with the current 

comsuption indicating the speed of charge. Charge time is in 

direct proportion to the volume of music. When the battery is 

full, RECHARGE indicator will stop flashing and then off.

Put two AA 1.5V battery into handheld microphone (bodypack 

transmitter), push the Power Switch to middle, the Power 

Indicator will flash once, RF Indicator comes on green, 

the speakers are quiet.

40

41
42

43

27.Trailer Handle

28.Heating Pane

29.Handle

30.Audio Out

31.Voltage Selector Switch

32.AC Fuse/Battery Fuse

33.Power line(~115V /230V)

34.External DC Input Jack

35.2PIN Power Socket

36.Rechargeable Battery Cover

37.Warning

38.4.5AH/12V Rechargeable Battery

39.Truckle Of Trailer

40.Mic Head

41.RF Indicator Of Handheld Mic

42.Power Switch Of Handheld Mic

43.Battery Housing Of Handheld Mic

27

28

29

30
31

32

35

36

38

39

33
34

To  protect  rechargeable  battery  life, 
this unit is shipped without installing 
battery  fuse.  Before  using  this  unit, 
please  install  fuse(included  in  the 
accessries  pack).  Charge  the  battery 
fully  before    first  use.  Aviod  total 
d i s c h a r g i n g   o f   t h e   b a t t e r y .

IMPORTANT

37

Summary of Contents for PWMA230BT

Page 1: ...ker Stand Mount 8 Full Range Speaker LED Indicator Lights Wireless Microphone Included External 12V Power DC Input Connector Perfect for Karaoke Public Events Crowd Control etc Built in Bluetooth for Wireless Music Streaming Works with All of Your Favorite Devices iPhone Android Smartphone iPad Tablet Computer etc Bluetooth Wireless Network Name Pyle Speaker Bluetooth Version 3 0 Bluetooth Wireles...

Page 2: ...hassis it is very dangerous either open the chassis or put your hand inside the chassis don t do it If the device is not under normal working pull out the plug at once and contact your retailer or nearest distributor 4 Don t take volatile solvent such as toluene alcohol gasoline to clean the surface 5 Please don t put it in a unventilated environment or at direct sunlight in summer 6 Avoid moistur...

Page 3: ...ging you can play music at the same time then RECHARGE indicator will flashing with the current comsuption indicating the speed of charge Charge time is in direct proportion to the volume of music When the battery is full RECHARGE indicator will stop flashing and then off Put two AA 1 5V battery into handheld microphone bodypack transmitter push the Power Switch to middle the Power Indicator will ...

Page 4: ... to minimality or there will cause sound distortion 6 INSTRUCTIONS You can connect your Bluetooth phone or other device to the PA speaker 1 Turn on the unit 2 Press the ON OFF switch on front panel bluetooth will on 3 When the indicator light is on it means the bluetooth in ON 4 Use your Bluetooth phone or other device to search for the PA speaker It will displayed as 7 Play music on your phone or...

Reviews: