Pyle PWD203 User Manual Download Page 8

8

Programmable Features

1. Arming Mode. Select between manual

arming (Active), automatic arming (Passive), and

automatic arming with chirps that countdown

every 2 seconds until armed.
2. Parking Light Operation. Selects whether

the parking lights flash twice or remain on for

30 seconds after disarming the system.
3. Auto Rearm. Automatically rearms the

system in case of accidental disarming. The

system must be armed for at least 10 seconds

before disarming, and the hood/trunk must not

be opened or auto rearm is bypassed. If button

3 is selected, the doors will lock on auto rearm.
4. Arming Chirps. Select Normal or Silent

Arming.
5. Trunk Disarm Feature. When selected,

activating the Auxiliary function to open the

trunk will automatically disarm the system.
6. Ignition Locking. Automatically locks and

unlocks the doors with the ignition.The system

will not lock the doors if any door is open

when the ignition is turned on.
7. Ignition Unlocking. Automatically unlocks

all doors or just the driver’s door with ignition.
8. Door Lock/Unlock Pulse. Selects between a

1 second lock/1 second unlock for standard

vehicles, 3 second lock/3 second unlock for

vacuum lock systems, 1 second lock/1 second

unlock 2 times for some Japanese vehicles, and

30 second lock/1 second unlock to roll up

windows with lock on some German vehicles.
9. Passive Locking. Selects whether or not the

doors will lock with Passive Arming.
10. Open Door Report. Siren will chirp 4 times

if a door remains open 10 seconds after arming.

If vehicle has delayed dome light, program for

60 seconds (the sensor and trunk still report

after 10 seconds).

11. Siren / Horn Chirps. When set for Horn

Chirps the horn will honk when the alarm is

armed, disarmed, and triggered, allowing the

siren to NOT be installed. Button 3 adds horn

chirps with the warn away feature as well.1.

12. Auxiliary I. Selectable for Momentary,

Timed, or Latched operation.
Momentary operation - the system provides an

output as long as the transmitter button is held.
Timed operation - the system provides an

output that turns on for 30 seconds each time

the transmitter button is pressed. If the button

is pressed again during the 30 seconds, the

output turns off.
Latched operation - the system provides an

output that turns on when the transmitter

button is pressed and turns off when the

transmitter button is pressed again.
13. Auxiliary 2. Selectable for Momentary,

Timed, or Latched operation.
14. Auxiliary 3. Selectable for Momentary,

Timed, Latched operation or Ignition Latched

operation (turns on with ignition and remains

on until a door is opened).
15. Auxiliary 2 Auto Activate. When selected,

the Auxiliary 2 output can activate upon system

arming or upon system disarming to turn on

accessory items or turn on sensors, etc.
16. Door Entry Delay with Passive Arming.

When selected, the door input trigger will be

delayed for 15 seconds, allowing access to the

emergency override switch. Only delays when

the system is armed passively.
17. Horn Honk Output. Selects between pulsed

or constant output for the Brown/white wire.
18. Anti-Carjack Mode. Selects one of three

Anti-Carjacking modes: Active, Passive, or Full-

Time. Anti-Carjack Activation must be enabled

for any Anti-Carjack mode to operate.

BW3750 singles.qxd  1/28/2004  9:23 AM  Page 8

Summary of Contents for PWD203













Reviews: