background image

1

SYSTEM MANUAL

Full Featured Keyless Entry System

with Optional Starter Defeat and Passive Immobilize Feature

STANDARD FEATURES

Some of the system’s standard features

include:
• Two 4-button remote transmitters
• Remote keyless entry
• LED Status indicator 
• Valet switch

OPTIONAL FEATURES

This system has many optional features that

may not be compatible with some vehicles,

and may require additional parts and/or

labor. Please contact your dealer for more

details.

• Flashing Parking Lights
• Starter Defeat 
• Illuminated Entry
• Trunk/hatch Release
• Passive Immobilze feature 
• Horn Honk output 
• Remote Panic feature

REMOTE TRANSMITTER  LAYOUT

NOTE:Transmitter cosmetics may differ, but

button functions remain the same.

SYSTEM OPERATION
REMOTE LOCKING 

To lock the doors press button 1:

• The horn will beep once. *
• The parking lights will flash once.*
• The doors will lock.
• The LED will turn solid for 10 seconds

then start flashing slowly.

• The optional starter defeat will

engage.*

* Optional Feature.

The optional Starter Defeat feature disables

the vehicle’s starter until button 2 is pressed,

or until the Emergency Override is

performed.
If the optional Ignition Trigger feature is

programmed, turning on the ignition before

pressing button 2 to unlock the doors will

cause the horn to honk and the lights to

flash for 30 seconds. Press button 2 to

disarm the ignition trigger and allow the

vehicle to start.

REMOTE UNLOCKING

To unlock the doors press button 2.

• The horn will beep twice.*

• The parking lights will flash twice.*

• The doors will unlock.

• The dome light will turn on.*

* Optional Feature.

NOTE: If the optional two-step unlock

feature is installed, pressing button 2 will

unlock only the driver’s door. Press button 2

again to unlock all remaining doors.

Button

1

Button

2

Button

3

Button

4

853 new.qxd  3/15/2004  12:44 PM  Page 1

Summary of Contents for PWD103









Reviews: