RADIO RECEPTION :
1. Turn the VOLUME CONTROL clockwise until a “click” is heard
2. Set the FUNCTION Selector to AM or FM position.
3. Select required receiving band with the BAND SWITCH.
4. Turn the TUNING CONTROL to select the desired radio station.
5. Adjust the VOLUME CONTROL to obtain the desired sound level from the Speaker
6. To turn the radio off, turn the VOLUME CONTROL Counter-clockwise until a “click” is heard.
TIPS FOR GOOD RADIO RECEPTION
Use the FM WIRE ANTENNA and fully extend into an open area.
To insure best AM sensitivity, try repositioning the unit until the best reception is obtained.
USB/SD PLAY BACK FUNCTION
：
1. Using the function selector, choose 'USB'
2. Inserting a USB or SD card will automatically playback compatible audio files
3. While playing from a USB flash drive, inserting a SD card will take priority and play SD card files
4. When both flash media drives are inserted, USB will take priority and play first
*Please note the unit is compatible with only MP3 and WMA file types.
*
The unit is compatible with flash memory storage units smaller than 16GB
BLUETOOTH FUNCTION
：
Turn the 'ON / OFF-Volume Control' knob clockwise until you hear a 'beep' sound. This will turn the
Blue power light on.
Set the FUNCTION selector to 'USB' mode
Press and hold the 'Play / Pause' button to change to 'Bluetooth Mode'
Turn on your Bluetooth in your device. Search for “Pyle Turntable” and connect. When connected
successfully, the blue light will remain on.
To ensure optimum Bluetooth sound quality, please remain within 30 feet of the product during
connection.
*Press and hold the 'Play / Pause' button to switch between audio modes.
CELLPHONE/SMARTPHONE CHARGE FUNCTION :
When the unit is powered on, connect your USB cable into the port -- then connect your device to the
USB cable. Your phone will now charge.
AUX PLAYBACK FUNCTION - CONNECTED DEVICE
To play audio from Aux (3.5mm) connected input devices:
- Connect your device via audio cable and connect to the unit
- Switch the 'Function Selector', located on the front panel, to USB Mode
- On the side panel, press and hold the Play / Pause button for 5 seconds
The LED indicator light will blink and shine orange when the unit is ready to stream audio
Visit
www.PyleAudio.com
for additional product information and support
PyleAudio.com
Summary of Contents for PUNP34BT
Page 1: ......
