Pyle PTVDLED16 Manual Download Page 5

SAFETY INFORMATION

This unit has been produced according to all current safety regulations. The following safety tips should 
safeguard users against careless use and the dangers.
• Although this appliance has been carefully manufactured and rigorously checked prior leaving the factory,      
  as with all electrical appliances it is possible for problems to develop. If you notice smoke, an excessive  

 

  build up of heat or any other unexpected phenomena, you should disconnect  the plug from the mains    
  power socket immediately.
• Ensure that the unit is sufficiently ventilated! Never place next to or underneath curtains!
• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain     
  readily operable.
• This set should only be connected to a mains power supply which matches that stated on the label on the    
  rear of the TV - do not attempt to connect it to any other type of supply.
• The socket -outlet must be installed near the equipment and easily accessible.
• To prevent overload, don't share the same mains supply socket with too many other items of equipment.
•  Apparatus with Class 1 construction  shall be connected to a mains socket outlet with
   a protective earthing  connection.
• Keep away from rodents. Rodents enjoy biting into electric flexes.
• Always hold the plug when pulling out the plug from the mains supply socket. Do not pull on the flex, the   
  flex can become overloaded and cause short circuit.
• Set up the unit so that no one is able to trip over the flex.
• Do not place heavy items on the flex, which may damage it.
• Take note that the flex cannot be reached and pulled by young children, avoiding injury.
• Do not set up the unit near to heat sources. The casing and the flex could be damaged  by the impact of    

  heat.

• The screen is made of plastic and can break if damage is done. Be careful when collecting sharp edged  

 

  plastic splinters to avoid injury.
• Avoid placing the unit on any surface that may be subject to vibrations or shocks.
• To protect the unit during a thunderstorm unplug the AC power cable and disconnect the aerial.

  

Caution: 

  Do not touch the aerial (RF) connector.

• When you leave your home for a long period of time, unplug the AC power cable for safety reasons.
• The unit becomes warm when in operation. Do not place any covers or blankets on the unit in order to  

 

  

prevent overheating. The ventilation holes are not to be blocked. Do not set up near radiators.

  Do not place in direct sunshine. When placing on a shelf leave 5 cm (2") free space around the whole unit.
• Do not allow water or moisture to enter the TV. Do NOT use in wet or moist areas such as Bathrooms,    

 

  steamy kitchens or near swimming pools.

• Do not use this unit when moisture  condensation may occur

• Any repairs must be carried out by qualified personnel only.
• Do not open this unit. A non - expert attempting to repair the unit could be dangerous and potentially  

 

  cause a fire hazard.
• Liquids  spilt into the unit can cause serious damage. Switch the set OFF and disconnect the mains power    
   supply, then consult a qualified service  person before attempting to use the unit again.
• Do NOT remove the safety covers. There are no useable  or serviceable parts inside.
   You may invalidate the warranty. Qualified personnel must only service this apparatus.
• Do NOT tap or shake the screen, you may damage the internal circuits. Take good care of the remote              
  control, do not drop.
• Never place hot objects or open flame sources on or close to the TV.
• High temperatures can melt plastic and lead to fires.
• To clean the TV use a soft dry cloth.Do NOT use solvents or petrol based fluids. For stubborn stains, you        
  may use a damp cloth with dilute detergent.

HEADPHONE WARNING

Loud music can damage  your hearing  irreversibly, therefore do not set the volume to a high level when 
listening through headphones, particularly for lengthy listening periods.

WHERE TO INSTALL

Locate the television away from direct sunlight and strong lights, soft indirect  lighting is recommended for 
comfortable  viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on 
a sturdy platform of which the surface should be flat and steady. This will prevent  it from falling over.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will 
break or damage the screen, and so that small objects cannot be inserted into the ventilation  slots or 

openings in the cabinet.

Summary of Contents for PTVDLED16



























Reviews: