www.PyleUSA.com
www.PyleUSA.com
10
Troubleshooting
11
System Connection 2
Problems
Cause
Modified Methods
Screen displays
disorder or
malfunction
•
lnfluenced by the outside
element.
Computer has problem.
•
Turn off the set, pull out the
wire, reinsert it then start
the set again
No sound
•
Improper speaker terminal
connection.
•
Improper or wrong sound
frequency terminal connection.
•
Improper power socket
connection
•
The volume is too low
•
Press the MUTE key on the
panel
•
The speaker terminal is short
-circuited
•
Connect tightly
•
Properly check and
connect the sound
frequency in terminal
•
Connect the power
correctly
•
Turn the volume to the
suitable position
•
Press down MUTE key
•
Cut off the power and
connect the speaker well
then start the power again.
Sound distortion
•
Improper or wrong amplifier
input terminal connection
•
The volume is too loud
•
Connect properly
•
Properly adjust the
volume of the
corresponding channel
The Sound
doesn't continue
and replays has
'Di-DA" noise
•
Using the speaker with the
impedance of 8 Ω
•
Adjust the volume to the
suitable position
•
Cut off the power and
connect the speaker
correctly, then turn on the
power.
•
Using the speaker with the
impedance less then 8 Ω
•
The volume is too loud
•
The speaker terminal had
short-circuit or connected
improperly.
WIRELESS
BT ANTENNA