background image

www.PyleUSA.com

12

Remote control

1.

 Press this button to turn on the MP3

2. 

In FM mode, press this two buttons 

    to select previous or next channel.

3. 

Press these two buttons to select the 

    previous or next track in USB or SD 
    or Wireless BT mode

4. 

Volume up or down 

5.

 Press the numbers to select the tracks 

    directly. The unit takes 1-2 seconds to 
    response in USB or SD mode.

6.

 Press this button to select repeat mode:

    One and all.

7. 

Press this button to select the playing 

    mode, such as USB/SD/FM/WIRELESS BT

8. 

EQ function, if the mp3 with EQ 

9.

 Play and pause function for MP3

Features:

 

 • 

Blue LED Screen for Media Playback Information

 • 

Double Decoder Digital Media Function with Remote Control

 • 

Compatible with MP3/WMA

 • 

Wireless BT Streaming, FM Radio

 • 

Built-in USB & SD Card Readers 

 • 

Power On/Off with LED Indicator

 • 

1/4'' Phone Jack

 • 

LED Level Display

 • 

Master Volume Control

 • 

High/Mid/Low Tone Controls

 • 

Front 3.5mm AUX CD Input Jack

 • 

MIC 1 Talkover

 • 

Phono/Aux Volume Control

 • 

Mic 1 Mic 2 Volume Controls

 • 

Mic 1 Mic 2 6.35mm Connectors

1

2

3

4

5

6

7

8

9

Summary of Contents for PT210















Reviews: