9.8 Calibrating Mode - Calibrating the Compass
9.9 Calibrating the Compass - Rotation Calibration Display
9.10 Calibrating the compass -
Magnetic Declination Display
When to Calibrate the Compass
+
The Watch has to employ a compass calibration
in one of the following conditions:
+
The Watch is used for the first time,
+
+
+
+
How to Calibrate the Compass
+
The compass calibration includes two different
processes, they are the Rotation Calibration and
Magnetic Declination Setting.
+
Rotation Calibration: Turn the watch for more
than 2 turns in the Rotation Calibration Display
to
+
Magnetic Declination Setting: Input the magnetic
declination of the city which is close to your
current position into the Watch in the Magnetic
Declination Display
+
It is advisable to carry out them both from time
to time, this practice achieves the more accurate
compass reading.
IMPORTANT
: If the Watch has not been calibrated,
the direction made by the Watch may be an
inaccurate direction.
The battery has been replaced,
The bearing direction digits are flashing, and
the "
OFF CAL
" indicator appeared,
The compass use in a new region where is far
apart from the place in which the compass had
been calibrated,
The user intends to regulate the precision of
the digital compass.
regulate the precision of the digital compass.
Rotation Calibration Display
+
To select the Rotation Calibration Display,
hold the [M] button in Compass Display.
+
To start rotation calibration, press [S/S] button
once, and then the pointer will start rotating.
+
When the pointers is rotating, turn the watch
(keep parallel to the horizon) in the same
direction as the rotating pointers for more
than 2 turns.
+
W h e n t h e 2 - t u r n r o t a t i o n c a l i b r a t i o n i s
completed, press the [S/S] or [L/R] button to
stop the calibration and the pointer.
+
When the pointer is stopped, hold the [M]
button to back to the Compass Display or
press the [M] button once to set the magnetic
declination.
Magnetic Declination Display
+
Check the previous chapter 9.7 to get the
magnetic declination of the city which is close
to your current position. That angle will be
inputted into the Watch during the calibration.
+
To select Magnetic Declination Display, press
the [M] button in Rotation Calibration Display.
+
When the current magnetic declination is
appeared, press the [S/S] or [L/R] button to
increase / decrease the number. (Hold down
the button to change the number at a higher
speed).
+
When the setting is completed, hold down the
[M] button to exit the setting display. The
Watch will also exit the setting display if NO
keystroke has been activated for 1 minute.
Magnetic
Declination Display
Magnetic
Declination Display
Magnetic
Declination Display
Compass Calibration
Compass Calibration
Rotation Calibration
Stop Display
Rotation Calibration
Stop Display
Rotation Calibration
Turning Display
Hold [M]
Hold [M]
Hold [M]
Hold [M]
[M]
[M]
Compass Mode
Compass Mode
10.0 Battery
Indication & Battery Replacement
Low
Battery Low Detection
+
When the battery-low indicator appears on the
display, it means that the capacity of the
battery is low. It is recommended to replace
the battery with a new CR2032.
+
However, if the appearance of battery-low
indicator is caused by using the Watch under
very cold condition, the indicator will be
d i s a p p e a r e d w h e n n o r m a l t e m p e r a t u r e
returns.
NOTE:
It is recommended to complete the
battery replacement by
Watch
NOTE:
If the battery has been replaced, follow
the previous chapter 9.9 to 9.10 to calibrate the
compass before using the compass.
a certified service
agency, because this
contains precise
electronic sensors and components.
Batte ry
In dic atio n
Low
digits selected
(flashing)
The Watch is used
for the first time
"
OFF CAL
"
indicator appeared
Rotation Calibration
To Regulate the
compass's precision
To use the Watch
in a new region
Magnetic
Declination Setting
The battery
has been replaced
When to Calibrate the Compass
Compass Calibration Process
[S/S] / [L/R]
[S/S]
pointers
rotated at
15 seconds
per turn
COMP
COMP
[S/S]/[L/R]
hold [S/S]/[L/R]
Increase / Decrease
the number
Increase / Decrease
the number
at a higher speed
Summary of Contents for PSWRM70
Page 1: ...Front Cover Back Cover ...
