background image

-6-

-3-

b

15 degree
viewing angle

eyelevel

a

Fig 2a

Step 2:

mount to wall

First, determine the height of stand
The best height of stand is parallel to eyelevel of a person who sitting on a couch.
Normally, the horizontal distance of eyelevel is about 4’ from ground level.
The following two conditions are for determining the perfect height of stand:
1)

the distance between wall and couch(Fig 2a).

2)

the distance of eyelevel from ground level plus the distance measured from

eyelevel of a person sitting on couch with viewing angle of 15 (Fig 2a).

For example:
1)

the distance of ‘a’ is 5’-7’, the distance of ‘b’ is about 1’

2)

the distance of ‘a’ is 8’-13’, the distance of ‘b’ is about 3’

3)

the distance of ‘a’ is 14’-17’, the distance of ‘b’ is about 4’

The perfect height of stand centre will be anywhere within b, where you feel
comfortable for viewing.

°

Attach

Step 2: Attach mount to wall

WARNING

Step 1: Attach bracket to TV

Check your TV manual to confirm the diameter of bolt to be used or choose an
appropriate bolt according to size, height and position of the holes on your TV. See
pages 4-5 of these instructions for examples.

For correct installing, make sure that hook of every bracket must facing down. Use
selected bolts, spacers and washers for installing bracket at the back of display.
Adjust two brackets to equal heights and level. Once aligned, tightly secure the
bolts.

As shown in Fig.1.

Don't force the bolt into the hole, which will cause a damage of

equipments and injure of person. Don't use electric drill to fasten any bolts.

Note

:

the

UP side on the top

"

"

.

IMPORTANT

:

Step 1: Attach bracket to TV

IMPORTANT

Note

:

We are not responsible for any personal injury or product damage due to mishandling,
incorrect mounting, incorrect assembly or incorrect use of this product.

The supplied wall mounting hardware is not for use on steel stud walls or cold

cinder block walls. If you are uncertain about the nature of your wall, please consult a
qualified contractor. If the hardware you required is not included please contact your
local hardware store.

Note:

Caution :

This Product LCD /Plasma Wall Mount Bracket is intended for use only

with the maximum weights indicated .See apparatus instructions .Use with products
heavier than the maximum weights indicated may result in instability causing possible
injury .

Caution :

UP

Fig.1

UP

Summary of Contents for PSW101CM

Page 1: ... Then put safe bolts into the bottom of the brackets and lock it as shown in Fig 3b Step 3 Hanging display 8 Multifunctional double deck wall mount INSTALLATION GUIDE IMPORTANT If don t understand about right install ways please consult to normal installing specialist IMPORTANT Thank you for choosing our products Thank you for choosing our products Tilt Flat Panel TV Bracket Easy installing Just h...

Page 2: ... 2 A 3 B C 1 1 4 1 4 4 Wall mount Left bracket Right bracket M4 mm 12 bolt M4 mm 16 bolt M5 mm 16 bolt M6 mm 16 bolt M8 16mm bolt M 36mm 5 bolt M6 36mm bolt M 36mm 8 bolt Qty D 4 4 4 4 4 4 E F G H 4 2 Safe bolt A H L I K J M ID Description Qty Fig 2b Fig 2c Concrete wall Using the wall mount as template to mark 6 holes location on the wall Th ee holes are located at the top row of the slots and th...

Page 3: ... TV See pages 4 5 of these instructions for examples For correct installing make sure that hook of every bracket must facing down Use selected bolts spacers and washers for installing bracket at the back of display Adjust two brackets to equal heights and level Once aligned tightly secure the bolts As shown in Fig 1 Don t force the bolt into the hole which will cause a damage of equipments and inj...

Page 4: ...Fig a 4 5 Following examples shows how to use bolts spacers and square washers 1 Some displays have vertical backs No spacer is required Install the bracket directly to the back of display by using bolts and square washers provided As shown in Fig 1a Fig 1a M4 Fig bit M5 Fig bit Fig 1b M6 Fig bit M5 Fig bit M8 Fig bit M6 Fig bit A B 3 I E D 3 2 I I 2 C I M8 Fig bit E 3 I G 3 I 2 F I M M M ...

Reviews: