3
4.
Now, fit the four (4) steel columns onto each
pole.
5.
Now, tighten all the screws to secure the
stand. Tightening the screws causes the
stoppers to expand, holding the steel poles in
place.
6.
Set the bottom plate aside for now. Next,
get the smaller top plate and insert the four
screws from the top. When upside-down, the
plate should look like this:
7.
Repeat the stopper procedure for this plate;
line up two rubber stoppers with the hex side
up, slide on the plastic stopper combo, and then
loosely screw on a nut to hold into place.
8.
Take the complete top plate and fit it onto
the bottom plate:
