1
DD notes detection
Different size notes
are mixed.
Abnormal notes are
mixed
Problem with speed
sensor
Problem with speed
sensor
Problem with right
counting sensor
Problem with the
right counting sensor
Problem with
counting sensor
left
Problem with the left
counting sensor
Error code
Type of error
Cause of error
Procedure for the removing the cause of the error
< CAUTION >
DD notes detection
Different size notes
are mixed.
Abnormal notes are
mixed
0
Check the last note in the Stacker.
Check all notes in the Stacker, and then set them again.
Check the note before last in the stacker
Check all the notes in the stacker,and then set them again.
Clean the sensor or replace it
Clean the sensor or replace it
Clean the sensor or replace it
In case that many“dd errors happens, removed all notes from the Hopper and Stacker, and make sure the condition of notes(holes,
tear, fold, etc.) Then align and set notes again.
7.Trouble shooting
13
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
Piece of paper
Clip
Rubber hand
Damp and/or
stained note
Stack of notes mixed with
clip or piece of paper or
rubber hand
Curled note
Folded note
8.Precations for Handling of Machine
* How to Set Bank Notes
Precautions related to proper setting of bank notes to be counted
---Damp and/or badly stained notes should be avoided.
---Check that no foreign matter (piece of paper, paper clip, dust ,etc.)
is mixed in with bundle of notes
---Folded or curled notes should be straightened before they are set
in the Hopper.
---For brick notes (bundle of new notes which are stucked to each other
by ink). Bend and flex the stack before it is set on the Hopper.
* How to align the notes to be counted.
---Align the long and short edges of the notes by lightly tapping the
stack; Insufficient alignment may cause an operation error
---Sensors are used for the counting system of this machine.
As these sensors are of optical construction, the system may cause
miscounting should dust, dirt, etc. stick to the sensors. Clean the
sensors with an accessory brush when counting. Operation is finished.
---piece of paper, dust and/or trash etc. accumulated in the Hopper and/or
stack may be taken into the machine; this may cause a malfunction of the
machine. Clean the Hopper and Stacker in the same way as above.
14
BILL COUNTER
HIGH QUALITY AND LEADING ARTICLE IN THE
