NOTE:
When you replace the projector from a cold to a warm environment water
vapour might occur. Don't turn the projector on when this occurs but wait
until the vapour has disappeared.
KEYSTONE
If a projected picture has keystone distortion, correct image with
Keystone
adjustment. The image becomes trapezoid shape when the screen or project is not
level. Please reposition the projector to improve its angle to the screen. However, the
circumference of the image may not be focussed.
If not able to use the Keystone correction function to correct the trapezoid distortion,
Keystone
Screen
Projector
Projector
Screen
Image adjustment
•
turn the lens into the projector
then turn it out slowly
at the same time
looking at the resolution point carefully
when the image is very clearly (take the middle area of the image),it is the
best situation of the lens
Focus adjustment
The new projector
using it first time
commonly will
appear image faintness and the the image is trapezoid
it is course
that not adjust well of the lens focus and the trapezoid
please follow the step the correction
• •
Menu setting
Menu setting method
1. Using the projector
press
menu
key,
the picture disply on screnn to adjust the
menu(picture one)
2. press
key
the menu in turn
circle into
image
>
volume
>
function
>
system
>
setting
>
image
adjust interface
3. Elect the adjust interface
use
key
elect the item that need to adjust(picture two
4. use
key to adjust the elect item paremeter
5. Finished the elect item parameter
press the
menu
key again
exit the page
6. Repeat operate the 2
5step
till finished all the parameter's enactment
press
exit
key,exit the menu page
otherwise
the menu page will auto exit
after a period time
1. Image menu adjustment
a. Press
menu
key
untile disply the
above picture of the menu
b. Press
key
elect the option
that need to adjust
c. Press
key
adjust
parallelisn elect parameter.
d. Press the "menu" key again exit
the menu page parameter adjust station.
