Pyle PRJ3D89, User Manual

Page: 8 / 18

and move to the next higher or lower item in the menu.
If there is no image displayed, check all connections and input setting.
that the projector is working normally.(If no sources have been
connected to the projector the indicator light will stay red.)
button on the remote control, The indicator light will turn green indicating
Press the POWER button on the projector of the STANDBY/ON
6. When the projector is turned on, the indicator light rurns red to orange
5. Turn on hard power switch located on the back of the projector.
4. Connect the projector to an electrical outlet using the supplied power
2. Connect a video source to the projector.
6HFWLRQ7XUQLQJRQWKH3URMHFWRU
-
-Press these buttons to increase or decrease the sound volume level
and directly choose the item in the menu.
--/--
˖
-Select the channel rapidly.
-Call:
-Press this button to view the current signal input and current channel
number.
&KDSWHU%DVLF2SHUDWLRQ
1. Make sure that power of the projector and all equipment connecting with
the projector is not on.
3. Remove the lens cover.
cable.
1RWLFH
7