compartment .
with corresponding input ports located on the side of the projector.
the PC/AV button located on the top of the projector until AV is select.
To select the AV source use the mode button on supplied remote or press
connector fits the inpu
Please confirm the type of
VGA source while the power is on may result in operational errors.
Please turn off the power of the projector and signal before connecting a
Video output and left/right audio output of signal source should connect
1RWLFH
&RQQHFWLQJ$XGLR9LGHR6RXUFHV
connections located on the side of the projector.
Connect
audio and video output sources to the corresponding
input
frequency.
Refer to the VGA source manual to configure the source resolution and
5
&RQQHFWLQJDFRPSXWHU
t on the projector, the
projector can be damaged if the wrong connector is inserted.
Set projector to the “VGA” by using the button “PC/ AV”.
6HFWLRQ8VLQJWKHUHPRWHFRQWURO
,QVHUWLQJEDWWHULHV
1. Remove the rear cover
2. Load the batteries as indicated by the marks in the battery
3. Put the rear cover back on
1RWLFH
Summary of Contents for PRJ3D79
Page 1: ......
