SPEAKER CONNECTION
One or more speakers (4 or 8 Ohm) can be connected to the amplifier with or without
transformers. However, before you connect any speakers to the amplifier, the total
impedance must be calculated in order to avoid damage to the amplifier. A total speaker
impedance greater than 8 Ohms or less than 4 Ohms can cause this damage to occur.
SYSTEM 1
:
Single Speaker System
NOTE : Connect the speaker (+) to the amplifier's 4-Ohm or 8-Ohm terminal, depending
on the speaker being used.
SYSTEM 2
:
Two (or more) Speakers in Series
NOTE : Connect the speaker (+) to the amplifier's 4-Ohm or 8-Ohm terminal, depending
on the TOTAL IMPEDANCE of the two speakers. If each speaker has an impedance
of 4-Ohm, the total speaker impedance in this series cofiguration is 8 ohms.
Pyle Home PMZ300A Manual - 4
SYSTEM 3
:
Two (or more) Speakers in Parallel
NOTE : Connect the speaker (+) to the amplifier's 4-Ohm or 8-Ohm terminal, depending
on the TOTAL IMPEDANCE of the two speakers. If each speaker has an
impedance of 8-Ohm, the total speaker impedance in this series configuration
is 4 ohms.
