Pyle PMX8BU User Manual Download Page 3

13. Unplug this apparatus during lightning storms or when unused for long periods  

       time.

14. Refer all servicing to qualified service personnel. Servicing is required when the  

       apparatus has been damaged in any way, such as power supply cord or plug in  

       damaged, liquid has been spilled or objects have fallen into the apparatus, the  

       apparatus has been exposed to rain or moisture, does not operate normally, or  

       has been dropped.

15. 

CAUTION: 

These service instructions are for use by qualified service personnel  

       only. To reduce the risks of electric shock do not perform any servicing other than  

       that contained in the operation instructions unless you are qualified to do so.

INTRODUCTION

With the 

PMX8BU

, you have purchased an absolutely state-of-the-art DJ mixer. Its 

extensive features open the door to new and creative ways of working, while 

making it suitable for a variety of professional applications. At the same time, the 

unit is extremely easy to operate, allowing you to completely unfold creativity.

The following instructions will give you a brief run-down on the terminology 

and functions of the unit. After reading, please store this manual in a safe place 

for future reference.

Your 

PRO MIXER

 was carefully packed in the factory and the packaging is designed 

to protect the unit against rough handing. Nevertheless, we recommend that you 

carefully examine packaging and contents for any signs of physical damage which 

may have occurred during transit.

  • 

If the unit needs to be shipped, please always use the original packaging to avoid  

     damage.

  • 

Never let unsupervised children play with the unit or with its packaging.

  • 

Please dispose of all packaging materials in an environmentally-friendly fashion.

Please take care to always ensure adequate ventilation. Do not place the PRO 

MIXER near heating units or heat-generating devices in order to avoid over-

heating.

      CAUTION!

We would like to point out that high volumes can permanently damage your 
sense of hearing and/or your headphone or speaker systems. Therefore, please 
turn the MAIN control in the MIC/MAIN section all the way to the left before 
turning on the mixer. And please exercise caution and common sense when 
setting volume levels.

www.PyleUSA.com

3

Summary of Contents for PMX8BU









Reviews: