Remote Control replacing batteries
PULL OUT
PUSH
Technical parameters
LCD Drive Method: TFT Active Matrix
Display Size: 7 Inch(diagonal)
Aspect:16:9/4:3 Selectable
Display Format :480 x RGB x 234
Number of Pixels :1440 x 234
Video System Input :NTSC/PAL Auto-select
Back Light :High Brightness Type U Shaped CCFT
Power Source:DC12V
Current Consumption:8W
Dimensions (H x W x D):49 x178 x 160(mm)
Supplied accessories
Main Set 1
Remote control 1
Screw and Keys 2
Manual 1
Spare Frame 1
1)Always use new batteries when replacing the old set.
2)Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3)Battery replacement is necessary when remote control acts sporadically or stops
operating.
4)Do not drop, apply shock or step on the remote control.
5)Do not spill water on the remote control.
6)Do not place objects between the remote control and remote sensor.
7)Do not use remote control for other equipments at the same time.
8)If the MONITOR does not operate even when operating the remote control from
a close range, it is time to replace the batteries(use CR-2025), refer to the label
on back of the basic control.
