Full output power level can be determined by turning the gain
control clockwise until the apparent loudness does not appear to
increase any more. Leave the control at the setting where this
begins to become apparent.
4.
VOLUME CONTROL
Plug for the waterproof remote volume
control. When installed, this control will turn off the Marine
Amplifier Kits when turned all the way down.
5.
INPUT
Stereo RCA audio input for connecting other audio
devices.
6.
To Connect Bluetooth
1. Turn on the amplifier, the red bluetooth indicator LED
keeps blinking at this moment.
2. Look for the "bluetooth" function in your phone setting and
open it.
3. Search the bluetooth device which is "pyle amplifier". After
you connect the bluetooth successfully, the red bluetooth
indicator LED will stay on.
Bluetooth Version: 3.0
Only models PLMRMB2CW and PLMRMB2CB feature
built-in bluetooth.
The switches and gain settings are located behind a watertight
plug, which also lights up when the amplifier is on. Be sure to
replace the plug when finished with adjustments.
1. The
INPUT LEVEL
switch selects the input sensitivity of the
amplifier. If you are connecting to a LINE level source (typically
any RCA type connection) then the switch should be in the LINE
(out) position. When connecting to loudspeaker outputs or
headphone or high level sources then set the switch to the
SPEAKER (in) position.
2. The
POLARITY
switch allows the user to optimize bass
performance in the case that there are more than 1 set of
loudspeakers producing bass in the system. Play some music
with strong bass content and listen with the switch alternately in
the NORMAL and REVERSE position until it can be determined
which setting results in more pleasing bass response.
If in doubt, or if any interaction with other speakers is unlikely,
then leave the switch in the NORMAL position.
3. The
GAIN
control adjusts the overall level of the amplifier.
When using the amplifier without volume control the level should
beset to achieve a balance with other loudspeakers in the
system. As arule, keep the gain setting as low as possible while
still insuring that the system will reach full output power. When
using the system with external volume control, set the external
Volume Control to FULL (clockwise) and adjust the gain on the
amplifier until full output power is reached.
3
4
