Pyle PLCD4MRKT, Owner'S Manual

Page: 8 / 14

8
OPERATION
TURN ON/OFF THE UNIT
Press button (1) to turn on the unit.
When the unit is on. Press and hold it for 2
seconds to turn off the unit.
SOUND ADJUSTMENT
Press SEL button (2) to select the desired
adjustment mode. The adjustment mode
will change in the following order:
BAS-TRE-BAL-FAD-LOUD-EQ-DX-STEREO-VOL
BAS: bass
TRE: treble
BAL: balance
FAD: fader
LOUD: loudness
EQ: equalization
DX: distance
VOL: volume
By rotating the audio knob (2), it is possible
to adjust the desired sound quality.
Press and hold SEL for 2 seconds. You can
choose the area between USA and
EUROPE by rotating the knob (2).
LOUDNESS FUNCTION
In LOUD item you can turn on/off
loudness function by rotating the audio
knob (2).
EQ FUNCTION
In EQ item you can select the preset EQ
mode by rotating the audio knob (2) as
below:
CLASS---POP---ROCK ---EQ OFF
DISPLAY INFORMATION
Press DISP button (7) to show the time for
several seconds. After several seconds it
will return to show the information.
SET THE TIME
Press and hold DISP button (7) for 2
seconds. The
“HH” will flash. Rotating the
audio knob (2) to change the hour. After that
press audio knob (2) the
“MM” will flash.
Rotating the audio knob (2) to change the
minute. Then press
DISP button to confirm.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the
AUX IN jack (11).
RESET FUNCTION
RESET button must be activated with either
a ballpoint pen or thin metal object. The
RESET button is to be activated for the
following reasons:
a) Initial installation of the unit when
all wiring is completed.
b) All the function buttons do not
operate.
c) Error symbol on the display.
Note: if press RESET button , the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION

SWITCHING TO RADIO MODE
Press MODE button (1) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.

SELECTING THE FREQUENCY BAND
At radio mode, press BND button (13)
to select the desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3 → AM1→ AM2

SELECTING STATION
Press button (9) or button (8)