1. One piece portable MP3 loudspeaker player
2. One piece easy installation bicycle handlebar bracket.
3. One piece USB cable
bike speaker system.
this bike speaker system has been
Device Features
-The high quality aluminum case is sultable for both indoor and outdoor environments.
-The internal superior Hi-Fi speaker produces excellent sound
outdoor settings.
-With the special Amp. design. the speaker output quality will not decay during the life of battery.
-The internal rechargeable long-life Li-ion battery provides for extended use
-When the earphone is plugged in. the device switches from the speaker to the earphone automatically.
-Incorporating the USB, charging and earphone inputs into one jack results in an elegant appearance.
-The device supports MP3/WMA format.
Product Specification
Model No. PLBKA100BK/PLBKA100SL
Speaker output THD+N=0.15%
SNR=94dB
Earphone Output THD+N=0.6%
SNR = 92 dB
Playing Time Speaker: 8.5 hours(depends on the playing volume)
Earphone : 55 hours
Charging Time USB: 8 hours
USB(5V/1A) A/C commercial adaptor:3 hours
Capacity 2G
Interface USB 2.0 Full speed
File System FAT16 / FAT32
Music Format MP3 / WMA (Below 384 kbps)
Temperature Function within -10°C - 50°C
Size/Dimension 100 x 40 x 40 mm
Weight 240g
bike speaker system,
quality in both indoor and
The LED Indicator
- The LED indicator will flash once every second when the device is
playing normally.
- While no song in the memory, the LED indicator will illuminate for two
seconds and flashes for one minute until the device shut down.
- The LED indicator will flash rapidly when the battery is low and it continues
to flash rapidly until the battery is dead.
- The LED indicator flashes when the battery is charging and stays on when
the charging is completed.
- The LED indicator will continue to flash while the songs are being
downloaded.
Trouble Shooting
- The LED indicator is functioning normally, but there is no sound:
Check whether or not the earphone is plugged in and that the USB cable is
still connected.
- When the device is not playing normally or behave abnormally when
connected to the computer:
Charge the device for approximately 30 minutes and then Reset the system.
Charging the Device
- The device needs to be fully charged before its initial use 8 hours.
- To charge the battery, use the 3.5mm/USB cable.
- Attach the 3.5mm connector at one end of the cable to the device and the
USB at the other end to a computer.
- The LED indicator will illuminate during charging, and it will go out when the
device is fully charged.
- The device will shut off automatically when the USB cable is disconnected
(including during charging or data transmission).
Downloading Music
- Connect the device to a computer through the USB cable. The device can
then be operated as a flash drive for downloading music.
- It is recommended to create separate folders for a variety of music and for
easy access and downloading.
- The WMA format supports Window Media Audio up to and including version
9. It does not support “Digital Right Management (DRM)” format.
Instructions for Operating the Device
1. Power on : Pressing the button lightly, the device will play song
automatically after the LED indicator stays on for approximately 3 seconds.
2. Power off : Pressing the button for about 3 seconds, the LED indicator
will flash rapidly and go out and the device is turned off.
3. Pause: Pressing the button lightly during playing will cause the LED to
stay on and the player will enter the “Pause” mode. Pressing the button
lightly again will return the player to normal play status. Please note that
the system will turn itself off automatically after 1 minutes in "Pause" mode.
4. Change songs during the playing:
Pressing the button lightly, the device will skip to the next song.
Pressing the button lightly, the device will skip to previous song.
|
►
||
►
||
►
||
►
||
►►
|
► ►
Installation Instructions
O
X
Correct angle
Wrong angle
Securing the MP3 loudspeaker player into
the handlebar bracket.
Releasing the MP3 loudspeaker player from
the handlebar bracket.
Button Operations
5. POWER On or Off, and Play or Pause
4. VOLUME Increase
3. VOLUME Decrease
6. SKIP Backward
2. SKIP Forward
1. Shared Earphone/POWER/USB 3.5mm
input with cover
4
3
2
1
5
6
|
►►
|
► ►
►
||
7
7. LED status indictor
@ 1.5W
@ 1.5W
@ 32Ω
@ 32Ω
