4
Quick-Start
In order to master the usage of the pinpointer we recommend you to read the
quick start carefully and practice it indoors. You should explore treasures
outdoors after you have tried to settle into the basic performance.
1.Prepare metal samples. This pinpointer is the non-motion metal detector. As
long as you’re approximate to the target all kinds of metals will respond. You
can use 25 dollar coin as sample.
2.Please take off your watch, ring and other metal accessories. Keep the
pinpointer far away from the wall, the floor and other metal objects and also the
electric light, television, computer, mobile phone and other electrical appliances
that will cause the electromagnetic interference.
3.Put 25 dollar in a plastic or place it on wooden table. There should be no
other metals under the table or around the coin in order to avoid the influence
of metal. Please set the pinpointer above the coin vertically. (See figure.3)
Fig. 3
4.Please turn on the power supply. The signal strength LED will flash two times
and will vibrate twice and the LED will light. The unit is balanced automatically.
Then it will be in the state of waiting.
Note: Because of the impact of the magnetic field or surrounding electromag-
netic field the unit may be self-excitation or decline the sensitivity when you
change the position or rotating direction. In this time you should press the
balance button lightly to enter a new balance to maintain effective detection
sensitivity. Please hold the pinpointer straight downward and balanced it once.
Then keep holding as the device approaches the bottom of the coin slowly (see
Figure.4). When the distance is within about 3cm the pinpointer begins to
response, the motor begin to vibrate, and the red LED will light. If you let the
pinpointer approach the coin more, the sensitivity of the motor will make it
vibrate frequency and higher. The LED will light in the order of red, green, blue
and white .When it lights until white the motor frequency will be at its highest.
Summary of Contents for PINPOINTER
Page 1: ...PMD64 PINPOINTER MANUAL ...
