09
10
Power input
Audio in
L
R
ANT
E. Set up and user instructions
(1) Connect the power adapter with the transmitter's power jack.
(2) Connect the 3.5mm plug of
to the transmitter's audio-in jack,
connect the lotiform plugs to AUDIO OUT jack of TV, DVD, STB, etc. ( if it is a
computer, you need to connect lotiform plugs with Audio cable2, then connect
the 3.5mm plug of
to the speaker jack of the computer.) If the TV is
used with a STB, DVD, etc., please prior to connect the transmitter with the
STB, DVD, don't connect to the TV set directly. (
because manufacturers of
TVs are different .)
Audio cable2
Audio cable1
Maybe there isn't audio out
signal for some TVs when connect to them directly
Audio out
Connect to audio out of TV
Connect to audio out of STB
TV
L
R
M
IC
IN
Audio out
Connect to audio out of DVD
Connect to audio out of PC
JH-8013/JH8014 Manual
1. Wireless TV hearing aid function
Power input
Audio in
JH-8014
JH-8013
If the sound source has a digital audio output, connect the optical socket of the
sound source with the optical fiber cable.
(Just for JH-8014A/B only)
(3) Switch on the transmitter, the working indicator will be on. Choose a suitable
place for the transmitter near your sound source (e.g., a TV). Adjust the audio
source
in working status (when the transmitter connected to a
STB, DVD, PC, etc.).
’
s volume properly
JH-8013/JH8014 Manual
(4) Put the receiver on correctly, with the indicator facing away from your body.
then switch it on, its blue indicator will be on. A
IMPORTANT: make sure the volume on the receiver is set to the lowest to
protect your hearing,
djust the
VOLume to a comfy listening level, you will hearing the sound from the
transmitter.
If the sound source doesn
’
t have any of the audio out jack mentioned above, just
plug the microphone cable into the MIC IN socket of the transmitter, then fix the
microphone on to the audio source
’
s speaker.
JH 8014
-
JH 8013
-
PAIR
MONO/STEREO
DIGITAL AUDIO OUT
OPTICAL
COAXIAL