www.PyleUSA.com
4
5
www.PyleUSA.com
Battery Load
Please follow the steps below to implement battery connection:
1. Press the buckle and pull out to open the battery compartment lid as shown
by diagram
1
and
2
.
2. Insert two batteries according to the polarity direction marked as shown by
diagram
3
And then press the joint area as shown by diagram 4 to load
batteries successfully.
3. Load all the other four batteries following
step 2
and cover the battery
compartment lid.
Features:
•
Heavy Duty Wood Construction
•
5'' High-Definition Speaker
•
Volume, Bass, and Treble Controls
•
3. 55mm Aux Input
•
Carry Handle
•
Power On/Off Switch w/ LED Indicator
•
Functions: Input, Drive Switch, Volume, Treble, Bass
•
Portable and Lightweight for Easy Transport
What's in the Box:
•
Electronic Guitar Amplifier
Technical Specs:
•
Power Supply: 10 Watts
•
Power Output: AC110V/220V Switchable
•
Construction Materials: Lightweight Plywood, Coated by High-Quality Leather
•
Product Dimensions (L x W x H): 9.37'' x 7.04'' x 8.82'' –inches
FCC Warning:
This equipment has been tested and found to comply with the requirements
for a Class B digital device under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are intended to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
1
3
2
4
Questions? Issues?
We are here to help!
Phone:
(1) 718-535-1800
Email:
