www.PyleUSA.com
•
Troubleshooting
•
If the trouble is not in the above mention reasons, do not maintain this
system by yourself. Please contact our factory or the local distributor.
5
Receiver or transmitter
indicators isn’t light.
No RF signal on receiver
Has RF signal, but no AF signal
Receiving Signal Noise,
Other interference
Signal distortion
Working distance is too short.
Signal is not stable.
The receiver is not connected to power,
or transmitter is out off batteries.
The frequency is not match or
they are out of working distance.
Please check the frequency.
The microphone isn’t connected
correctly to amplifier or mixer;
check the volume control.
Emission modulation frequency
deviation is too small; Receiving
output level is too low; There may
be interference signal
Transmitter modulation frequency
deviation is too large, the receiver
output level is too high
Transmitter was set in low power.
Receiver antenna isn’t installed correctly.
Check if there is strong electromagnetic
interference.
Problem
Possible Reason
