Pyle PDWM2234, User Manual

Page: 4 / 8

www.PyleUSA.com
3
Receiver with Bluetooth Features and Operation
7. RF Indicator for A Mic:
When turned on the transmitter, indicator light is lit.
8. RF Indicator for B Mic:
When turned on the transmitter, indicator light is lit.
9. Battery Indicator: LOW BAT
Indicator light is lit then you will hear a “
bee
”
sound, means you need to recharge it.
10. Battery Charging Indicator:
Indicator light is lit while recharging the battery
and turns OFF when fully charged.
11. USB Port for charging:
5v, 1000mA
1. Power ON/OFF:
Press Power
ON
, the
receiver indicator light (12) is ready.
2. Antenna:
Lightly lift up the antenna.
Caution:
it can’t be turned round.
3. Audio Output:
Connect the 6.3mm
Audio Output Plug to the MIC input of
the amplifier or directly to the mixer, or
using the attached extra cable to
connect it to a 3.5mm Audio input.
4. Bluetooth ON/OFF:
Turn
ON
the
Bluetooth. Press and hold the Bluetooth
button for 2 seconds. Bluetooth indica
tor (13) blinks. Open the Bluetooth of
your mobile and search for the receiver
Bluetooth Network Name: 'PyleUSA’
and enter Bluetooth Password: '0000' to
pair. A “
bee
” sound means the
Bluetooth pairing is successful, then
you can play music from your mobile.
5. Volume:
Adjust the volume
6. Echo:
Adjust ECHO if needed