www.PyleUSA.com
4
www.PyleUSA.com
5
Matching Receiver and Transmitter
(Only apply to some models)
1. Make sure the receiver is powered
OFF
.
2. On transmitter side, press and hold the frequency- change button, then press
and hold the power button till the display is flashing.
3. Turn
ON
the receiver and then you will see the RF light is flashing.
4.
Attention:
For the receiver that has LED display, turn
ON
the receiver and
wait for 3-5 seconds
5. Get back to the transmitter side and re-press the frequency-change button.
6. Matching is successful if the RF light is
ON
or the LED display shows frequency,
otherwise, re-do step 1 to step 5.
Body Pack Transmitter
(Only apply to some models)
Functions
1. Clip microphone socket
2. LED Iight
3. Antenna
4. LED display
5. Frequency-change button
6. Power switch
1
1
1
1
1
Frequency-change button
1
