HANDHELD MICROPHONE
1. Grille (capsule inside)
2. Power/Low battery Indicator
3. Power ON/OFF/MUTE Switch
4. Battery Compartment/Cover
MICROPHONE OPERATION
1. Open battery cover. Install the provided 2pcs 1.5V AA batteries and then close the
cover. Pay attention to the correct polarity.
2. Slide power switch to "
ON
" position to turn on the microphone. Power indicator
will flash once and then go off. This indicates correct operation.
3. Now receiver RF indicator should light. Please confirm frequency of microphone
same as the receiver before operation.
4. Slide power switch to center "
MUTE
" position to mute the sound.
5. During operation if power indicator lights red, this indicates the battery is Iow.
Please replace new battery.
6. If the microphone is not going to be used for any length of time, please slide
power switch to OFF position and remove the battery.
RECEIVER PARTS DESCRIPTION
Front
Rear
1.
Power Indicator:
The indicator will be illuminated when the receiver is powered ON.
2.
Power Switch:
Press to switch the receiver power to ON and OFF.
3.
ECHO:
Rotate the echo knob to your desired level.
4.
MUSIC:
Rotate to adjust volume of input music.
5.
RF 1/2:
The indicator will be illuminated when wireless microphone is on.
6.
W/MIC1/W/MIC2:
Rotate to adjust volume of wireless microphone 1/2 and wired
dynamic MIC 1/2.
7.
MIC 1/2:
Insert the 6.3mm MIC plug of wired dynamic MIC (not provided) into MIC
1/2 jack.
8.
ANT 1/2:
Receiving antenna of wireless microphone.
9.
Audio output jack (RCA type):
Connect this set of RCA Jack to Active Speakers,
Hi-Fi system, etc. to output the final mix of music and microphone.
10.
AF OUT:
Connect this jack to MIC IN of your amplier to output the final mix of
music and microphone.
11.
Audio Input Jack (RCA type):
Connect this set of RCA jacks to an audio source
with RCA output such as DVD, Streamer etc. to bring in the music.
12.
Aux In (3.5mm stereo type):
Connect this jack to an audio source with phone
out such as computer, iPad, mobile phone etc. to bring in the music.
13.
DC IN jack:
Connect DC jack of supplied AC/DC adapter to this jack.
www.PyleUSA.com
2
3
www.PyleUSA.com
1
2 3
4
2
3
4
5
6
5
6
7
7
11
12
13
8
8
9
1
10
AUX IN
AF OUT
