Pyle PBMSPRG3, User Manual, Page: 4 / 6

www.PyleUSA.com
4
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied
audio line cable to connect from the device’s “Line Out” to the “Aux In” of this
device. Then press the “MODE” button, the speaker will prompt “Aux Input Mode”,
then Enjoy.. When using an external device, all functions can be controlled by the
external device.
TWS Function:
1. Turn ON two identical speakers you want to pair, please be noted that they
must have the same BT paring name, both under BT mode. You only need to set
up one of the two units;
2. Press and hold “Mode” button then the speaker will make a tone “di” to start
pairing, and will make “di” voice for 3 times once successfully paired;
3. Connect Wireless BT with your mobile phone to play music by the two paired
Speakers to create more powerful surround sound effect.
4. If you want to exit the TWS mode, press and hold “Mode” button (of the unit
that you set at beginning) again to exit the TWS function.
Remark:
Under the TWS mode, if you connect your mobile phone to the unit (you
set at beginning) via the provided audio cable, it will start to play AUX via TWS
function, under this status, you can not switch to Wireless BT mode by pressing
the Mode button.
Colorful LED display and off:
This unit will display colorful pulsating bright lights when the music is ON . To turn
off the light, please push the Play/Pause button for 5 seconds.
Battery Charging:
1. Power OFF the unit, put the provided charger cable into the charging slot of
the unit, connect the other end to your PC or other charger with 5V output, the
red charging indicator light will be lit.
2. Charging time should be 3 hours. When fully charged, the indicator light will
switch off.
3. In order to prolong the battery life, please do not charge more than 8 hours.