FRONT PANEL
1.
CH 1-
combo input connector offers both female XLR and 1/4" phone jack
for mic line inputs
2.
LINE 2/3
stereo line inputs RCA plugs, let you connect CD, MP3, tape deck,
players.
3.
MAIN OUT RCA
plug to connect the mixer to a receiver or amplifier
4.
MONITOR
this is used to monitor the master signal output thru head
phones
5.
LINE/ MIC/ HI-Z
SW input select switch, set this switch based on what is
plugged into CH1, connect your guitar, your microphone, your instrument.
6.
LINE 2/3 LEVEL
control to adjust the volume of signal input of line 2/3
7.
PEAK L.E.D.
lights up went the input signal of CH 1 is to high
8.
CH 1 GAIN
control to adjust the volume of signal input of CH 1
9.
PHANTOM POWER
this switch activates the phantom power supply on
the XLR connector of ch 1, it offers 18V phantom power
10.
PHANTOM L.E.D.
Indicates that phantom power is on
11.
USB ASSIGN TO LINE
input select switch set this switch to activate the
usb dataconnector from you computer or you line input
12.
MASTER CONTROL
lets you control mixer's overall volume level send to
the main out
13.
CLIP L.E.D.
Lights up when the main out put signal is too high
14.
MONITOR CONTROL
to control volume output of the monitor jack
15.
POWER L.E.D.
Indicates that the unit is powered ON.
USB PORT
The unit is provided with a USB port (Windows 2000/XP, Viata and Mac OS X
compliant 2.O fullspeed compliant), thus allowing 16Bit/48KHz stereo
recording and playback inconjunction with your computer. The
MAIN MIX
signal is always sent to computer
USB
input, while to listen the signal from
your computer you should press the
USB ASSIGN TO LINE
switch.
Please be careful to avoid digital loop recording while listening.
EXT. DC IN
when you use this mixer without computer, power supply can be
from outside USB power socket, but USB function will be not work while the
other function works normally.
www.PyleUSA.com
4