1.
Safety
1.1
About
Our company hopes that all drivers safely enjoy our scooter for as long as they wish! You can compare it to learning a
bike- it might not be so easy at first, but it is extremely gratifying and once you learn, you’ll know for life!
Before each ride, please check tire for damage or loose parts; if you notice anything was off, please contact the agent for
repair.
Please read the instructions for all relevant safety information, including the speed limit, indicator light warning, and
more.
Please do not use our drifting scooter in a dangerous manner without exercising safety.
Please do not arbitrarily modify our scooter parts; not only will this affect the scooter, it may even damage the
performance of the scooter or cause serious harm.
1.2 Weight Limit
There are two reasons for weight limit:
1. Ensure the safety of drivers.
2. Reduce the overload of the electronic scooter damage.
Drivers biggest weight limit: 275 lbs.
The driver of the minimum weight limit: 45 lbs.
1.3
Distance
The electronic scooter’s biggest range (distance traveled) is related to many factors, such as:
Terrain: driving on smooth, flat ground increases distance (rough terrain will decrease).
Weight: the weight of the drivers affects the distance.
Maintenance: reasonable charging and maintenance of the battery can increase the range.
Speed and driving style: maintaining a consistent speed will allow you to travel for a greater distance. Stopping and
accelerating too much will cause your scooter to lose battery power quicker.
1.4
Speed Limit
The maximum speed of the electronic scooter is 6 mph
When driving over maximum allowable speed, you will be alarmed by the scooter’s buzzer.
The electronic scooter should be kept under the specified speed to keep the balance of the driver; when the speed is
over than the specified speed, the scooter will be harder to drive and balance.
2.
Driving
You must fully understand the instruction manual before driving; it is very important for you to understand these security
issues.
2.1
Starting
Step 1: Start the electronic scooter by pressing the power switch.
Step 2: Step carefully on to the scooter with one foot at a time. The automatic balancing system will trigger when
there is one foot on the scooter; slowly get the other foot on the scooter to begin driving.
Step 3: Manipulation of the scooter after successful standing and balancing, the electronic scooter will remain in a
stationary state. If you lean slightly forward, the scooter will move forward. If you lean slightly backwards, the scooter
will move backwards. Please make sure that you only increase the angle of your lean very slightly. If you lean to
quickly, the scooter will move quickly and it will be easy to lose your balance.
NOTE: If the scooter is not balanced while getting on, the scooter will beep and an indicator light will flash.
