Pyle Chopper Series PLATVB84A, Owner'S Manual

Page: 5 / 8

4
Installation
Wiring
1. Screw the brackets to the bottom of the speakers.
2. Find a safe, ideal mounting location and fit the brackets
over the chosen mounting bars.
3. Fasten the mounting screws after you review the safety of
the mounting location
1. Be sure to run the wiring securely and far away from any
moving components.
2. Connecting the power cable to the power source:you will
need to connect the 12V red wire to a (fused 5A) switched
power source
3. Use the 3.5mm stereo jack to connect to you entertainment
source (MP3 player,etc)
4. Use your player device and wired remote bluetooth control
box to control your level of loudness.