Radio Operation
1. To enter RADIO mode(MODE button or RADIO icon)
When you use MODE button or source menu (tapping RADIO icon) to enter RADIO
mode, it will display radio interface as follows:
* Some icons on radio interface correspond with the buttons on remote control or control
panel as follows:
and
icons = VOL- and VOL+ buttons = VOL knob
MUTE icon = MUTE button
List icon : to display 1~6 icons interface in the left side of the radio interface.
RADIO icon: to enter source menu
MENU icon : To pop up the page1 of SETTINGS MENU
MAP icon : To enter GPS mode but not exit radio mode
2. To switch between bands (BAND)
The BAND icon or button can switch between bands of FM1, FM2, FM3, AM1(MW1) and
AM2(MW2), and the word FM1,FM2,FM3,AM1(MW1) or AM2(MW2) will be displayed on
screen.
3. To search for a station (<< and >> icons or v and ^ or |<< and >>| buttons)
1) Long touching << or >> icon or long pressing v or ^ button on remote control or long
pressing |<< or >>| button on control panel can automatically search down or up for an
available station beginning from the current frequency.
2) Briefly touching << or >> icon or briefly pressing v/^ or |<</>>| button can manually
search down or up for a your desired station beginning from the current frequency.
4. To preset and scan all memory stations (APS icon or A/PS button)
1) When long touching APS icon or long pressing A/PS button, the radio searches from
the lowest frequency and checks the signal strength level until 1 cycle search is
finished, and the 6 strongest stations are preset to corresponding preset number
memory bank for the current band.
The presetting function can be implemented in selected FM or AM band. (It can presets
3x6 stations for FM and 2x6 stations for AM(MW) in all)
2) When briefly touching APS icon or briefly pressing A/PS button, the radio scans for
each preset station in FM or AM(MW) band from NO.1 bank, each preset station broad-
casts for 5 seconds. After finishing a circle of scanning, it will resume broadcasting the
station in NO.1 bank.
NOTE: In FM band, FM1,FM2 and FM3 are preset and scaned as one band at a time;
In AM(MW) band, AM1(MW1) and AM2(MW2) are preset and scaned as one band at a time.
Radio interface
Radio interface with 1~6 icons interface
All manuals and user guides at all-guides.com
