2. Go to your mobile phone and turn on the Bluetooth and search for the new Bluetooth device.
In the paring mode, the LED will blink red and blue. If not paired for 3 minutes, the Bluetooth
headset will power off automatically
3." BT headset" will appear on the Bluetooth list. Press to connect.
4. The LED will flash blue slowly and you can use the Bluetooth headset to call or to listen music
instead.
5. After the Bluetooth headset is connected, you can listen to the music through the headset,
and control the volume with the + or - button, or go back/forward with the >| and |< button.
6. Press >|| to pick up the phone call or press and hold for 2 seconds to reject the incoming call.
During the active phone call, press and hold for 2 seconds to finish the call.
7. Press >|| twice rapidly in succession to re-dial your last phone number.
8. The * Button is to reset or restart the Bluetooth headset.
9. You can charge the device with your computer USB port or charge using any USB charger with
a 5V 1A output. The Led will flash red when charging and will turn blue once the unit is fully
charged.
STEP 1:
The Bluetooth headset is in the closed position when you buy it. This means that the detachable
USB Bluetooth control center is attached to the center of the headset.
STEP2:
The USB Bluetooth control center is easily removed from the headset frame by bending the
headset frame carefully. Gently squeeze the headset frame together to release the USB Bluetooth
control center and remove with the other hand.
(VERY IMPORTANT: DO NOT OVERBEND THE EARFRAME, THIS WILL DAMAGE THE
INSERT OF THE USB BLUETOOTH CONTROL CENTER. BEND THE EARFRAME JUST
FAR ENOUGH, SO THAT THE USB BLUETOOTH CONTROL CENTER CAN EASILY
