TM
TM
To Set the Pacer Rate (bpm)
- Press and hold the [mode] button for 2 seconds to
change the display from Pacer Mode to Pacer Setting
Mode.
- The digits flash on the display because it is being
selected.
The setting procedure
- If the digits are flashing, press the [start/stop] button to
increase the number (step of 5 BPM); hold the
[start/stop] button to change the number at a higher
s p e e d . P r e s s t h e [ c o m pa s s ] b u t t o n t o d e c r e a s e t h e
number (step of 5 BPM); hold the [compass] button to
change the number at a higher speed.
- After you set the pacer, press the [mode] button to
exit the setting sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Pacer Mode.
NOTE:
The setting range of the pacer: 40 bpm to 180 bpm.
9.1 Pacer Mode -
Setting the Pacer Rate (bpm)
decrease the bpm
at a higher speed
increase the bpm
at a higher speed
decrease the bpm
increase the bpm
Pacer Setting Mode
(90 bpm)
Pacer Setting Sequence
hold
[compass]
hold
[start/stop]
[compass]
[start/stop]
17
18
19
20
Dual Time Mode
- The '
T-2
' indicator will be displayed on the 1st row of the
display.
- The 2nd row of the display shows the dual time:
hour, minute and second.
- The 3rd row of the display shows the calendar: month,
date.
- The indicators encircle the display show the current time
in 1 second resolution analogically.
NOTE:
The calendar readout of the Dual Time Mode will be
the same as the Current Time Mode.
To Set the Dual Time
- To set the dual time, press and hold the [mode] button for
2 seconds to change the display from the Dual Time
Mode to Dual Time Setting Mode.
- The minute digits flash on the display because they are
being selected.
The Setting Procedures
- Press [mode] button to change the selections following the
Dual Time Setting Sequence.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button to
change the number at a higher speed. Press the
[compass] button to decrease the number; hold the
[compass] button to change the number at a higher speed.
- After you set the Dual T ime, press the [mode] button to
exit the Dual Time Setting Sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Dual Time Mode.
10.0 Dual Time Mode
- Dual Time Mode
10.1 Dual Time Mode
- Setting the Dual Time
11.0 Compass Mode
- The Precautions
hold
[mode]
Dual Time Setting Mode
Dual Time Mode
digits have been
selected (flashing)
Calendar
(month-date)
analogue
second
dual time
(hour,minute
second)
'T-2'
indicator
minute
hour
Dual Time Setting Sequence
hold
mode
mode
button
mode
button
Increase
the number
increase the
number at
a higher speed
[start/stop]
hold [start/stop]
decrease
the number
decrease the
number at
a higher speed
hold [compass]
[compass]
The Precautions when Using HandHeld TrackMaster
- Keep your HandHeld TrackMaster away from magnets or
the appliances which may contain magnetic objects such
as mobile phones, speakers, motors and etc.
- The HandHeld TrackMaster, like most magnetic
compass, points to the magnetic North which is slightly
different from the true North. Check the 'What is Magnetic
D e c l i n a t i o n '
s e c t i o n
f o r
m o r e
d e t a i l .
- Perform the compass calibration on the following
conditions:
1) when the HandHeld TrackMaster is used the first time,
2) when the '
DIST
' indicator is flashing,
3) the battery has been replaced, and
4) use the compass in a location where is apart from the
place in which the compass had been calibrated.
- To achieve an accurate result, you should avoid
measuring a direction on the following conditions:
1) the watch is closed to magnetic/metal objects,
2) the watch is closed to electrical appliances, and
3) the watch is placed inside a moving object or a
ferroconcrete building.
rotary bezel
The 'N' mark
which related to Compass Mode
The features of the HandHeld TrackMaster