background image

 

 

3

qualified service personnel under the following conditions: 

a.

 

If the power-supply cord or plug is damaged. 

b.

 

If liquid or objects have fallen into the product 

c.

 

If the product has been exposed to rain or water. 

d.

 

If the product does not operate and you have followed the manual for troubleshooting. 

e.

 

If the product has been dropped or damaged in any way, and the product exhibits a distinct 

change in performance may indicate a need for service and/or repair. 

18.

 

Replacement parts-If a part needs to be replaced, be sure the service technician has used 

replacement parts specified by the manufacturer or have the same characteristics as the 

original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 

19.

 

Safety check-Upon completion of any service or repairs to this product, ask the service 

technician to perform safety checks to determine that the product is in proper operating 

condition. 

20.

 

Wall of ceiling mounting-The product should be mounted to a wall or ceiling only as 

recommended by the manufacturer. 

21.

 

Heat-The product should be situated away from heat sources such as radiators, heat registers, 

stoves or other products(including amplifiers)that produce heat. 

PRECAUTIONS 

1.

 

In order to shut off the unit completely, unplug the power cord from the wall outlet, be sure to 

unplug the unit if you do not intend to use it for a long period of time. 

2.

 

Incorrect use of controls, adjustments and performance other than those specified herein may 

result in hazardous radiation exposure. 

3.

 

Should this product malfunction, discontinue use and contact a qualified service center. 

                                                           

WARNING 

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture 

                                                             

CAUTION 

                RISKS OF ELECTRIC SHOCK-DO NOT OPEN! 

                        To reduce the risk of electric shock, do not remove casing. 

                  No user serviceable parts inside. Refer servicing to qualified service personnel. 

                        The light flash with arrowhead symbol, within an equilateral triangle ,is   

                  intended to alert User to the presence of “dangerous voltage” which may be of   

                  Sufficient magnitude to cause electric shock to persons. 

    The exclamation point inside an equilateral triangle is intended to alert User 

                                                                      To the   

 

   Presence of important operating and maintenance(servicing)instructions in   

                              The literature that may accompany the appliance. 

         

 

 

Summary of Contents for Vintage PVTT2U











Reviews: