WARNI NG
FM ANT EN NA
AM A NTENN A
Power Amp
CD/DVD
CD Recorder
Pre amp Out
Power Amp
2 Mono Sub Outputs
Power Amp
Main Speakers
2 MIC
INPUTS
I POD or
MP3 i n put
AUX
7
8
1. Make sure that all connections are properly connected and the main
volume is set to minimum level before turning on the unit.
2. When more then one pair of speakers are used, (specially the main
speaker output) make sure that the speakers used are of the same
wattage and impedance, otherwise the unit maybe damaged under
high power or long term operation.
3. To avoid humming sounds and unwa nted noise, make sure that all the
wires are properly inserted.
4. For speaker cords, strip off the vinyl coating and twist the wire tip.
Push down the pink jack or loosen the screw terminal, before inserting
the wire tip, then fasten it and tighten the screw. Be careful not to let
the wires stick out of the terminal otherwise this may cause a short
circuit when wires of different terminal contact each other.
5. After the unit is turned on, adjust the main volume to the desired level
same is true with the bass and treble volume, etc.
PDF created with pdfFactory trial version
www.pdffactory.com
