Pyle Pro PTCDS5U Vintage, Instruction Manual

Page: 8 / 10

2. AFTER READING OF CARD INFORMATION IS COMPLETED, PRESS THE “ RECORD “ BUTTON (9) AND THE
UNIT WILL DISPLAY “ “ & “ “ AND FLASHING. COPYING IS PERFORMING NOW.
3. AFTER COPYING IS COMPLTED, UNIT WILL STOP AUTOMATICALLY.
E-6
E) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING, THE HIGHER BIT RATE WILL GENERATE
BETTER SOUND QUALITY AND OCCUPY MORE SPACE OF MEMORY. THE SELECTABLE RANGE IS FROM 32 /
64 /96 /128 / 192 / 256 KBPS RESPECTIVELY
1.
SET IN “ PHONO “ FUNCTION (3) & REMAIN STOP MODE.
2. PRESS THE “ INFO “ BUTTON AT REMOTE HANDSET AND THE LCD DISPLA (2) WILL SHOW THE
DEFAULT BITRATE (128 KBPS)
3. PRESS SKIP OR BUTTONS (16,17) TO SELECT THE DESIRE BITRATE FOR ENCODING.
4. PRESS AGAIN THE “ INFO “ TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) WILL RESUME TO
“ PHONO “ MODE
F) TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO OR TAPE TO USB/SD TRACK BY TRACE DURING
ENCODING. EVERY TIME WHEN PRESS THE “
“ (TRACK SEPARATION) BUTTON ONCE AT REMOTE
HANDSET DURING ENCODING FROM PHONO OR TAPE TO USB/SD, THE SYSTEM WILL GENERATE A NEW
TRACK AND CONTINUOUS THE RECRODING. THE TEXT “ PHONO “ OR “ TAPE “ AT LCD DISPLAY (2) WILL
FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD/MMC CARD BY
FOLLOWING:-
A) SINGLE FILE DELETE
1
．
SELECT AT “ USB “ OR “ SD “ MODE.
2
．
PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (2) WILL SHOW (DEL
---001)
3
．
PRESS SKIP FORWARD OR SKIP BACKWARD BUTTON TO SELECT THE FILE GOING TO DELETE
4
．
PRESS THE “ REC “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP FORWARD OR
SKIP BACKWARD TO SELECT “ YES “ OR “ NO “.
5
．
PRESS THE “ REC “ BUTTON AGAIN TO CONFIRM THE SETTING.
B) ALL FILES DELETE (BY REMOTE CONTROL)
1. SELECT AT “ USB “ OR “ SD “ MODE.
2. PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (2) WILL SHOW (DEL
---001)
3. PRESS AND HOLD THE “ INFO “ BUTTON AGAIN AND THE LCD WILL SHOW “ FORMAT / Y/N “ AND
FLASHING. THEN PRESS SKIP FORWARD OR SKIP BACKWARD TO SELECT “ Y (YES) “ OR “ N (NO)
“.
4. PRESS THE “ REC “ BUTTON AGAIN TO CONFIRM THE SETTING.
REMARK :
- ALL THE FILES INSIDE THE USB STORAGE MEDIA OR SD CARD WILL BE DELETED COMPLETELY AFTER
CONFIRMING TO “ Y (YES) “ MODE.
- PRESS “ STOP “ BUTTON ONCE AT REMOTE HANDSET TO QUITE DELETE MODE
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO
EITHER CD, TAPE OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET
DIRECTLY, FOR MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD
BEING PARTIALLY EJECT AND YOU CAN REMOVE IT BY HAND.