background image

2

music will be existed at the same time. It is similar like 
playing at KARAOKE events.

8. 1/4" MIC INPUT JACK

-Lets you connect a microphone with a 1/4" plug.

9. AUX/CD RCA INPUT

-Lets you connect most high-level audio sources such as 
CD player, tape deck, tuner, camcorder or VCR.

10. SPEAKER L/R TERMINALS

-Lets you easily connect speaker wires directly to the 
amplifier.Speaker impedance can range from 8 to 4 ohms 
for the general stereo output.  please see the next 
instruction of using four 8-ohm speskers for stereo mode 
connection.

11.  VOLTAGE SELECTOR

-Lets you select the voltage of AC power input source. The 
amplifier has selectable input voltage from 110v/60Hz 
which is the standard in USA and CANADA. You can also 
switch the input voltage to 230V/50Hz for EUROPEAN 
opeation. Please make sure the switch is in the proper 
position before operating, otherwise severe damage will 
result not cover by the warranty. Please also replace the 
fuse with proper rating in this situation (see the next 
instruction for the fuse rating).

12. FUSE

-The amplifier uses a fuse for protection against surges 
and short circuit. If the amplifier suddenly turns off and 
will not turn on, check the fuse, If necessary, replace it with 

1

-amp, 250-volt, fast-acting, 5 x20mm fuse (not supplied).

Summary of Contents for PTA1









Reviews: