_________________________________________________________- 7 -_________________________________________________
7. CHANGE-OVER SWITCH
This device is used to 110V/220V or 115V/230V voltage conversion.
8. AC POWER CORD/FUSE HOLDERS
AC 220
～
240V 60Hz or 110-120V 60Hz ,Check the power voltage of supply with silk-screen of
the panel before connections. When occur a problem on this appliance, the fuse will be cut off, power
to prevent form a problem.
C.
CONNECTIONS
You will need a lot of cables for different purposes – see the following figures to make sure you
have got the right ones. Unbalanced equipment may be connected to balanced inputs/outputs. Either
use mono 1/4
＂
jacks or connect ring and sleeve of TRS jacks.
Fig. 5: Balance plug
