6
4. Assembling The Body (cont’d)
iv. Tremolo Unit (Part E)
Attach the tremolo unit using the six screws provided; do not overtighten.
Attach springs between the spring claw and the tremolo block -- most players
use 3 springs only. Finally, screw the tremolo arm into the tremolo unit.
v. Backplate (Part I)
Attach the backplate to cover the spring cavity. This step is optional -- many
players leave this plate off in order to easily access the tremolo block, especially
for changing strings.
vi. Strap buttons (Part O)
Screw the two strap buttons onto the butt of the guitar and the other onto the
left horn of the body.
5. Assembling the Neck
i. Tuners (Part J)
Push the six bushings into the holes in the
face of the headstock and then attach the 6
tuners using the 12 screws provided.
ii. String Tree (Part K)
The string tree is now attached to the peg
head. Locate the small hole in the face of
the peghead about 3 inches above the string
nut. Slip the string notches onto the screw
followed by the round cylindrical spacer. The string tree pulls the first and
second strings of the guitar downward. That downward pressure will keep the
strings from popping out of the nut slots while you are playing.
iii. Neck/Body Attachment
Attach the neck to the body using the four large screws. The neck plate acts as
a large washer and covers the locator hole on the back of the body.
